6 Tune Package (5.9 Cummins + Full 48RE)-Tuning Only-UDC Tuning

On the fly tuning works For 04.5-07 5.9 (325hp) Cummins using MM3 or Smarty Touch Only!
-If you have an 2003 or a 305hp 2004 or HP Tuners select “No”.
-Smarty Touch requires the Comm Mod for OTF to work:

Available for MY 04-07 Trucks

Injectors are typically advertised in percentage of fuel flow over stock or by added horsepower: Example 45% Over or 100HP injectors. This option provides the proper fuel mapping for the injector size you select:

-Add Specifics to Truck Mods List Below

The fee shown covers the cost of re-scaling your tunes to utilize the aftermarket map sensor and DOES NOT include the physical sensor; you will need to purchase that from a vendor of your choosing separately.

Please see the Project Trucks page for a more detailed description of what 10 Bar tuning is and links to purchase the sensor:HERE

FYI MOST trucks have a Stock Map Sensor. Choose “Stock” unless you know for sure your truck has a 10 Bar Map Sensor.

If you have Removed your Grid heaters select “Yes”, all other customers select “No”. This applies to DTC Coes P0541 and P2609.

For 03-04.5 Auto to Manual Trans Swaps Please see this article regarding APPS (TPS) and P2127 Code Issues:
5.9 Cummins Manual Swap: ECM and Throttle range Issues

Adds ECM control for a PacBrake on 04-07 Auto Trans trucks. Manual Trucks select “No”, this is already active in your ECM. -Requires an installed brake in your truck. Read more HERE

Please provide a complete list of your truck modifications. (If none, please write stock)