Installation Instructions
Thanks for your order! I’ll update you with tracking info when it becomes available. Please watch your junk/spam folder for shipping emails.
Below are some helpful links for when your MM3 comes in.
Step 1: Install your tuner…
Installation video:
https://www.youtube.com/watch?v=6V9NJt_pdZI
2006-2007 Model Year Specific Instructions:
https://www.5-9diesel.com/mm3-tuner-installation-on-a-2006/
EGT Probe installation requires a size “R” drill bit and a 1/8th NPT Tap:
EGT Install Note: You may need to power cycle your MM3 to get the EGT Probe to operate and display on the screen. After you have connected the EGT probe to the MM3, power cycle the MM3 by unplugging the OBD cord briefly and plug it back in.
If you do not see an EGT gauge position on your screen, you can change one of the gauge displays to EGT using the following method (EGT should be under the “Temperature” tab):
https://photos.app.goo.gl/1yHySCzSiDAmkaVt6
-A full list of parameters per model year can be found here:
https://www.madselectronics.com/SmartyTouchPIDS.html
If you would like to change the Dash Layout of your MM3 follow the example below:
https://photos.app.goo.gl/qgdTkK3JckWgqHjU9
Note: If you have a boost fooler (not a wastegate fooler) please remove it; see the tuning instructions (will come in the email with your tunes) for more info.
Step 2: Send your stock file…
How to get your stock file:
Instructions: https://www.5-9diesel.com/mm3-tuner-getting-your-stock-file/
Video Instructions Part 1: https://photos.app.goo.gl/By1de2hLe9zs3Y416
Video Instructions Part 2: https://photos.app.goo.gl/Ps2SXe2g7DkCqrw48
Email your stock file and your order # to robd@5-9diesel.com Once I have your stock file I can generally get your tunes sent back to you within 24 hours with further instructions. Note: Getting the stock file does not change anything on your truck, it will operate normally afterward: yes you can still drive it👍
Step 3: You will receive your tunes via email with further instructions 👍