Skip to content
5-9 Diesel LLC

3rd Gen 5.9 Cummins & 48RE Custom Tuning

CART ITEM

0 - $0.00

  • Main
  • 3rd Gen Products
    • Custom Tuning Products
    • Injectors
      • BBI 5.9 Cummins Injectors
      • Exergy Injectors
    • Transmissions
    • Lift Pumps
    • Fuel Pumps
    • Trans Parts & Upgrades
    • Intakes
    • Turbos
    • Exhaust Brakes
    • Apparel
    • MM3 Mount Kits
  • About My Tuning
  • Testimonials
  • Contact
  • Articles
    • MM3 Articles (+Touch & RaceMe)
      • MM3 TUNER: How to get the Stock File
      • MM3 Tuner: How To Copy Tunes To Your SD Card
      • MM3 Tuner: High Speed Log
      • MM3 Tuner: Installation on a 2006 & 2007
      • Changing PID’s on your MM3 Tuner
      • Changing MM3 Dashboard Layout
      • MM3 Tuner SD Card Error 20002
      • MM3 Tuner: Blank Screen with Red and Green Lights
      • MM3 Tuner: Return To Stock Programming
    • 5.9 Cummins general Articles
      • Early 04 or an 04.5 5.9 Cummins Dodge Ram: How to tell
      • 5.9 Cummins Manual Swap: ECM and Throttle Range Issues – P2127
      • Battery Issues: 5.9 Cummins
      • 5.9 Cummins Fan Clutch Problems 55056990AC
      • 2007.5+Year 5.9 Cummins Mexico Trucks (68026124AA and 68029123AA )
      • APS Relay Output Circuit Open
    • Diagnostic Codes
      • P0069 Code – 5.9 Cummins
      • P0191 Code 5.9 Cummins
      • P0234 Code 5.9 Cummins- Turbo Overboost
      • P0243 Code 5.9 Cummins
      • P0299 Code 5.9 Cummins- Turbo Underboost
      • P1222 & P1223 Code: 5.9 Cummins
      • P1740 Code 5.9 Cummins
      • P2127 Code 5.9 Cummins
      • P2509 Code 5.9 Cummins
    • Buying a used MM3, Smarty Touch or RaceMe Ultra…
    • The Best 48RE Controller Is Custom Tuning…
Close Button
FOLLOW US:

P0243 Code 5.9 Cummins

TURBO CHARGER WASTEGATE SOLENOID LOW

This code is applicable to 3rd Gen model year 04.5-07 5.9 Cummins trucks.  It is typically caused when an aftermarket turbo is installed that does not have an electronic wastegate.  This results in the factory wastegate harness getting unplugged and typically left hanging.  The ECM will sense the lack of continuity on the circuit and set code P0243 and illuminate the check engine light.

The proper solution is to purchase a wastegate fooler (NOT a boost fooler, they are two separate things) and plug it into the factory harness, then reset your DTC codes.

 

 

Archives

  • November 2018

Meta

  • Log in

Categories

  • Uncategorized

John 14:6 By Themespride